كايفيل
المقالات الفنية
اقرأ الإرشادات العملية حول فتحة الشق، وبنية المصفاة المعدنية، والمواد، والفحص قبل إعداد المواصفات.
متوفر باللغة الإنجليزية
Demister pad sizing inputs
Record the process conditions needed to specify knitted-mesh mist eliminator pads and their support grids.
عرض التفاصيل
Etched, laser-cut or electroformed screens
Choose a precision-screen process by feature geometry, sheet thickness, alloy and handling needs.
عرض التفاصيل
Wedge wire slot selection
Set slot width, profile and support arrangement for the direction of flow and solids being retained.
عرض التفاصيل
Strainer area, pressure drop and maintenance
Specify a basket or cone strainer from debris duty, available area and planned cleaning access.
عرض التفاصيل
Cleaning reusable metal filter elements
Plan a cleaning trial around contaminant, media construction and joint integrity before declaring a metal element reusable.
عرض التفاصيل
Perforated open area and structural support
Calculate theoretical opening area, then check ligaments, support spacing and installed coverage.
عرض التفاصيل
Woven mesh aperture and open area
Select wire diameter and clear opening together; mesh count alone does not define either aperture or flow area.
عرض التفاصيل
Filter rating, aperture and beta ratio
How to compare woven openings, porous-media claims and test-rated filter elements without treating every micron number as equivalent.
عرض التفاصيل
How to specify a custom metal filter
A useful metal-filter specification answers five questions: what the filter must separate, how it fits the equipment, what loads and chemicals it will see, how it will be cleaned, and how the finished part will be accepted.
عرض التفاصيللا توجد موارد مطابقة.