Shijiazhuang, Hebei, Chinasales@kaifil.com
KAIFIL
Filter media rolls and sheets

Stainless steel screen printing mesh

Compare 14 plain-weave stainless steel mesh geometries for screen printing. Use mesh count and wire diameter together to select a clear opening and open area for your ink and artwork.

Metal wire mesh
Mesh count (per inch)
200–500
Wire diameter (µm)
18–50
Clear opening (µm)
32.8–77.0
Open area (%)
36.8–51.3

Share a drawing, reference sample or application requirements to discuss the configuration.

Specifications

Stainless steel screen printing mesh
ParameterSpecificationNotes
Mesh count (per inch)200–500Reference geometries for selection. Confirm the selected configuration for your order.
Wire diameter (µm)18–50—
Clear opening (µm)32.8–77.0—
Open area (%)36.8–51.3—

Materials: Stainless steel wire · Plain weave

Product details

Choose the opening and wire together

Warp and weft wires pass over and under each other alternately to form square openings that carry ink through the stencil. Within the same mesh count, thinner wire gives a larger opening and more open area. Treat these dimensions as geometric inputs for ink transfer. Specify paint or ink filtration separately by particle retention and process conditions.

What theoretical ink volume measures

Multiply the open-area fraction by mesh thickness in µm to obtain theoretical ink volume in cm³/m². Actual ink deposit depends on screen tension, stencil thickness, ink rheology, squeegee setup and the substrate. Compare meshes by geometry, then measure the deposit in a trial on your press.

Cross-section of one mesh opening, with the theoretical ink volume in blue and the mesh thickness marked D.
Cross-section of one mesh opening, with the theoretical ink volume in blue and the mesh thickness marked D.
Screen printing mesh geometry

Screen printing mesh geometry

Mesh count (per inch)Wire diameter (µm)Clear opening (µm)Open area (%)
2005077.036.8
2303575.446.7
2504061.636.8
2503071.649.7
2503566.643.0
2703559.139.4
3003054.741.7
3253048.238.0
3252850.241.2
3252355.249.8
3502547.643.0
4002340.540.7
4001845.551.3
5001832.841.7

Pair the mesh count and wire diameter from the same row. For ideal square openings, pitch is 25,400 µm divided by mesh count. Clear opening is pitch minus wire diameter. Open area is the square of the ratio of clear opening to pitch, expressed as a percentage.

Download the geometry table

CSV with the 14 mesh pairs and nominal pitch for comparing or specifying a mesh.

Download: CSV

Selection guide

Include these details when discussing your requirements.

Mesh count and wire diameter
Give the pair, preferred clear opening and any required stainless steel grade.
Artwork and ink
Send the finest feature, ink or paste type and substrate.
Roll dimensions and print target
Include width, length, quantity, target tension and wet deposit if specified.

Frequently asked questions

How do I confirm supply for a printing job?

Send the mesh pair and roll dimensions. Ask Kaifil to confirm availability, mesh thickness and dimensional tolerances for the selected configuration.

Technical enquiry

Define the dimensions, media, joints and inspection records before confirming the order.

Technical details (optional)
Selection inputs

WhatsApp

Search