Shijiazhuang, Hebei, Chinasales@kaifil.com
KAIFIL
Filter cylinders and tubes

Coating screen baskets for paper machines

Cylindrical screen baskets for circulating paper coating colour. Match the slotted working face, scraper clearance and mounting ends to the coating screen.

Wedge wire screens
Flow direction
Inward or outward
Scraper clearance
Defined by the machine drawing
Working-face finish
Specified for the coating and cleaning method
Machine interface
Drawing-defined end rings and mounting seats

Share a drawing, reference sample or application requirements to discuss the configuration.

Specifications

Coating screen baskets for paper machines
ParameterSpecificationNotes
Flow directionInward or outwardMark the feed side, filtrate side and scraper position.
Scraper clearanceDefined by the machine drawingGive the required clearance and the scraper sweep relative to the locating datums.
Working-face finishSpecified for the coating and cleaning methodState the required treatment and the finished surface acceptance criteria.
Machine interfaceDrawing-defined end rings and mounting seatsInclude locating diameters, active and overall heights, seals and fasteners.
Screen wall material316L stainless steel (SUS316L)Specify the grades for the working face, ribs and end rings on the drawing.

Product details

Screening in the coating circulation loop

The coating colour crosses the slotted wall before returning to the coating circuit. The scraper passes close to the feed-side working face to clear retained material. Define the slot width together with the open screening area and the support-rib layout.

Set the clearance from the installed geometry

Specify the required scraper clearance along its full sweep. Record the locating diameters, overall and active heights, seating and sealing faces, and fastening details. Use the mounting datums to define where to check the working face for roundness and the installed basket for scraper clearance.

Two cross-sections with arrows pointing towards the centre on the left and towards the outside on the right.
Left, inward flow from outside to inside. Right, outward flow from inside to outside. The grey bar represents the scraper on the feed side. The sections are schematic.
Reference geometry for a paper-coating basket

Reference geometry for a paper-coating basket

ParameterReference value
Minimum slot width0.05 mm
Roundness, as stated±1.0 mm

These values describe a documented basket design. Set the slot for the coating duty and specify the roundness measurement method, reference section and acceptance criterion on the approved drawing.

Applications

Paper coating preparation and recirculation

Screen the coating colour in the supply or return loop at the location defined for the machine.

Frequently asked questions

Where does an inward-flow basket receive coating colour?

Coating colour enters outside the basket and crosses the slots towards its centre. For outward flow, it enters inside and crosses the slots towards the outside.

Which screen should I specify for a general paint or ink line?

Use the coatings and ink application guide to compare mesh discs, baskets and cylinders by holder, pigment, solvent and cleaning method. The scraper-cleaned basket on this page is for the paper-coating circulation loop.

Technical enquiry

Define the dimensions, media, joints and inspection records before confirming the order.

Technical details (optional)
Selection inputs

WhatsApp

Search