Shijiazhuang, Hebei, Chinasales@kaifil.com
KAIFIL
Filter media rolls and sheets

Six-layer reinforced sintered wire mesh

Six-layer sintered stainless steel mesh adds a coarse square-weave backing to a five-layer filter laminate. The extra layer stiffens the sheet and helps distribute flow on the outlet side.

Sintered metal filters and media
Additional square-weave backing
8 / 12 mesh
Stainless steel grades
SUS304 / SUS316L
Filtration grade range
1–300 µm
Sheet formats
1000 × 500 / 1000 × 600 / 1000 × 1000 / 1200 × 1000 / 1200 × 1200 mm

Share a drawing, reference sample or application requirements to discuss the configuration.

Specifications

Six-layer reinforced sintered wire mesh
ParameterSpecificationNotes
Additional square-weave backing8 / 12 meshMesh count of layer 6.
Stainless steel gradesSUS304 / SUS316LS03 reinforced sheet series.
Filtration grade range1–300 µmS03 series. Specify the target grade and acceptance method for the process medium.
Sheet formats1000 × 500 / 1000 × 600 / 1000 × 1000 / 1200 × 1000 / 1200 × 1200 mmS03 series, length × width.

Product details

Layer sequence through the sheet

Read the exploded view in the direction of the arrow, from the upstream face to the outlet side. Sintering bonds all six woven layers into one sheet.

  1. Protective mesh
  2. Filtration control mesh
  3. Drainage mesh
  4. First support mesh
  5. Second support mesh
  6. Additional square-weave backing

Thickness with 12-mesh backing

In this 3.5 mm construction, a 12-mesh layer reinforces the back of the five-layer laminate. Specify the finished laminate thickness on the drawing.

How to size the backing

The control weave determines the filtration grade. Size the downstream backing and the unsupported span together for the differential pressure in filtration and during reverse cleaning. Show the sealing edge and the mounting support on the drawing.

Applications

Integrated filter dryers

Specify the active area, support and sealing geometry for a filter plate in two-in-one or three-in-one process equipment.

Process filter plates

Define the clamping edge and the backing support in the housing for a plate cleaned in reverse flow.

Selection guide

Include these details when discussing your requirements.

Grade and process fluid
State the target grade, solids, fluid, viscosity and flow.
Drawing and support
State the sheet dimensions, thickness, preferred backing mesh, unsupported span, sealing edge and quantity.
Operating conditions
State the fluid temperature and differential pressure during filtration and reverse cleaning.

Frequently asked questions

Which layer sets the filtration grade?

The fine control weave in layer 2 sets the grade. The 8-mesh or 12-mesh designation identifies the additional backing.

Which backing is used in the 3.5 mm design?

This design uses a 12-mesh backing.

Technical enquiry

Define the dimensions, media, joints and inspection records before confirming the order.

Technical details (optional)
Selection inputs

WhatsApp

Search