Shijiazhuang, Hebei, Chinasales@kaifil.com
KAIFIL
Filter cylinders and tubes

Wedge wire laterals and header assemblies

Slotted wedge wire laterals collect or distribute liquid inside a treatment vessel. Specify a single lateral, a radial array around a central hub, or rows of laterals on a straight header.

Wedge wire screens
Layout
Single, radial or straight header
Screening wall
Welded wedge wire
Active slotted length
Dimensioned on drawing
Connections
Threaded lateral or flanged header

Share a drawing, reference sample or application requirements to discuss the configuration.

Specifications

Wedge wire laterals and header assemblies
ParameterSpecificationNotes
LayoutSingle, radial or straight headerFor radial layouts, show the hub, branch angles and vessel clearance. For straight headers, locate the branches from a fixed datum.
Screening wallWelded wedge wireSpecify the slot width at the working face, measured in mm or µm. Record the wire profile and its orientation.
Active slotted lengthDimensioned on drawingGive the exposed axial length in mm, with the plain connection and end lengths called out separately.
ConnectionsThreaded lateral or flanged headerFor a threaded lateral, give size, pitch and engagement. For a flanged header, give the mating standard, face and bolt pattern.
Branch spacingPitch or angular positionUse centre-to-centre pitch in mm for a straight header. Give radial branch angles in degrees and measure the branch lengths from the hub.
Flow directionCollection or distributionMark normal flow and any reverse cleaning flow. Include the maximum differential pressure and the temperature for each duty.
SupportsSupport rods and assembly supportsSpecify the rod section and pitch as well as the location and clearance of any external supports on the assembly drawing.
MaterialsStainless steel grade by partIdentify the grades for profile wire, support rods, main pipe, connection and end cap.

Materials: Specify the stainless steel grade for the profile wire and support rods, and identify the grades for the header, connections and end fittings separately.

Product details

Radial and straight header layouts

In a radial assembly, the laterals extend from a central hub. In a straight header assembly, laterals are spaced along the main pipe. The header carries liquid between the vessel connection and the branches. Its connection and branch layout are dimensioned separately from the screening surface.

What is built into a lateral?

Profile wires welded to support rods form the slotted cylindrical wall. At the header end, the connection can be detailed with a thread or a joint defined on the drawing. At the far end, a blind cap closes the branch where the design requires all flow to pass through the slots.

Straight flanged header with slotted laterals on both sides and a separate threaded lateral below
The upper view shows the header and branches. The lower detail shows a single branch with a threaded connection, slotted body and closed tip.

Collection, distribution and equipment interfaces

In collection service, liquid passes from the bed through the slots into the laterals and then to the outlet. In distribution service, liquid travels from the inlet through the header and laterals into the bed. A filter nozzle serves a local mounting point, while a lateral spans part of the bed. These components mount inside the vessel at the specified connection and supports.

Applications

Filter bed underdrains

Laterals provide a screened path to the outlet. Lay out the branches and supports to suit the bed and leave clearance for installation and removal.

Ion exchange vessel internals

Laterals can retain resin in the bed while liquid is collected or distributed. Specify the operating direction, resin size distribution and any reverse cleaning cycle.

Selection guide

Include these details when discussing your requirements.

Choose the vessel layout
Check the manway, installation sequence and clearance at the branch tips before fixing the hub or header position.
Set the screening duty
Use the retained media size distribution to choose the slot and verify the available open area against flow and allowable pressure loss.

Frequently asked questions

Is slot width the same as active slotted length?

Slot width is the opening between adjacent profile wires. Active slotted length is the axial extent of the exposed screening surface. Both dimensions belong on the drawing.

What should be checked for bidirectional duty?

Mark both flow paths and supply the flow and maximum differential pressure for each. Match the screening face, rods and supports to those conditions.

Technical enquiry

Define the dimensions, media, joints and inspection records before confirming the order.

Technical details (optional)
Selection inputs

WhatsApp

Search