Monel Wire Mesh

Nickel–copper alloy woven cloth in Monel 400 and K-500 material branches. A 27-row square-mesh series pairs 2–200 mesh counts with wire diameter and clear aperture for cut and formed screen parts.

Material: Monel 400 / K-500
Mesh count: 2–200 mesh/in
Wire diameter: 0.053–1.80 mm
Clear aperture: 0.074–10.90 mm

Share a drawing, reference sample or application requirements to discuss the configuration.

Monel wire-cloth roll with a visible wound edge01 / 04

Product images

Monel wire-cloth roll with a visible wound edge

Monel wire-cloth roll with a visible wound edge.

Specifications

Monel Wire Mesh
Parameter	Specification
Material	Monel 400 / K-500
Mesh count	2–200 mesh/in
Wire diameter	0.053–1.80 mm
Clear aperture	0.074–10.90 mm
Supply form	Roll / sheet / strip / cut blank

Materials: Monel 400 / Monel K-500; specify the grade and wire condition

Product details

Nickel–copper alloy woven cloth

Monel mesh combines a nickel–copper wire alloy with a specified woven structure. The square-mesh series pairs counts, wire diameters and geometric openings. Plain, twill and Dutch constructions are identified separately when ordering; a material name alone does not define the pore geometry.

Use all three geometric values

The 2 mesh row combines 1.80 mm wire with a 10.90 mm aperture. The 100 mesh row combines 0.10 mm wire with a 0.154 mm aperture. The full table preserves all 27 count–wire–opening combinations, including 30 mesh with 0.25 mm wire and a 0.596 mm aperture.

Monel 400 and K-500

Specify Monel 400 or K-500 individually. K-500 contains aluminium and titanium additions and uses a different strengthening route; wire condition and forming or joining requirements belong in the material specification. The dimensional table describes square-mesh geometry and does not assign every row to every material condition.

Service environment

Monel cloth serves chemical, petrochemical and marine screening components. Describe the process fluid, concentration, temperature, aeration and cleaning cycle so the alloy and component design fit the actual environment. Specify backing, frames and weld materials independently.

Supply and fabrication

We supply rolls, sheets, slit strips and cut blanks for discs, liners and formed screens. Define wire direction, cutting tolerance, retained edge and seam position. Forming radius and joint design follow the selected wire size, grade and condition.

Inspection and order traceability

Check material identification, weave, mesh count, wire diameter and geometric aperture, followed by finished dimensions and edge condition. State the required material-document format in the order. Record grade, wire condition and paired geometry together for repeat production.

Monel paired square-mesh series

Geometric opening; retain the complete row.

Mesh count (mesh/in)	Wire diameter (mm)	Clear aperture (mm)
2	1.80	10.90
3	1.60	6.866
4	1.20	5.15
5	0.91	4.17
6	0.80	3.433
8	0.60	2.575
10	0.55	1.990
12	0.50	1.616
14	0.45	1.362
16	0.40	1.188
18	0.35	1.060
20	0.30	0.970
26	0.28	0.696
30	0.25	0.596
40	0.21	0.425
50	0.19	0.318
60	0.15	0.273
70	0.14	0.223
80	0.12	0.198
90	0.11	0.172
100	0.10	0.154
120	0.08	0.132
140	0.07	0.111
150	0.065	0.104
160	0.065	0.094
180	0.053	0.088
200	0.053	0.074

Geometric opening; retain the complete row.

Ordering and production

Supply item	Order basis
Production lead time	2–3 weeks after order and drawing confirmation.
Trial orders	Small trial quantities for fit and process evaluation.
Regular material orders	Quantity follows the selected roll, sheet or cut-length format; US$3,000 regular order value.
Quotation basis	Alloy, media construction, wire or stock thickness, delivery format and quantity.

Applications

Chemical-process screens

Nickel–copper cloth forms screening surfaces for a defined chemical-process environment.

Marine and petrochemical parts

Cut and formed mesh provides supported screening inserts with the selected alloy and geometry.

Selection guide

Include these details when discussing your requirements.

Select the alloy branch: State Monel 400 or K-500 and the required wire condition.
Select one square-mesh row: Keep the mesh count, wire diameter and aperture paired.
Define the finished part: Show support, bending, clamping and joining details on the drawing.

Frequently asked questions

Are Monel 400 and K-500 interchangeable?

Specify the grade and condition individually. K-500 uses aluminium and titanium additions; its strengthening and fabrication requirements differ from Monel 400.

Does 100 mesh define the opening by itself?

The listed 100 mesh construction uses 0.10 mm wire and a 0.154 mm geometric opening. Keep wire diameter with the count when specifying the cloth.

Can the cloth become a disc or liner?

Yes. Supply the part outline, retained edge, support, wire direction and joining details along with the alloy and mesh specification.

Technical enquiry

Define the dimensions, media, joints and inspection records before confirming the order.